Batik Quilted Purses/Makeup Bags/Pencil Cases

Here's a photo of four of the finished cases. Two made with a black zipper and two made with a white zipper. The cases measure 8x7 inches or 21x 18cms.

To construct the cases I've sewn together 9 strips of batik fabric approx 2 inches wide. Then I've quilted the fabric with a plain print fabric on one side (with the batting in between). I've done some random quilting with purple thread which is actually a lot of fun to do.

I've then folded over the edges by ironing them (which are going to be the seams which I sew the zipper along) and sewn them down neatly.

I've used a 25cm zip on these, and the extra little bit just tucks into the case.

Before I attempted this project I had never sewn in a zipper. To work out how to do it, I watched a few being done on YouTube before I went ahead and did it myself.

Like most things, I would recommend pinning everything! I would also suggest that you sew on the zipper before sewing up the sides of the bag, just to make it easier to line up the metal edges of where the zip will go and also to allow for being able to manoeuvre the case around the sewing machine.
Try to work out where the seam will go for the sides of the case and then allow for the metal stoppers of the zip to finish just where you finish the seam for the side. This way when the case is complete the zip will close completely.

I've also made myself a camera case out of the same strips of fabric, for that I just added a draw string instead of a zip.

Papillion Quilt

Papillon Quilt

This is a quilt that I finished in March 2010 and it was my second finished quilt.

When I saw this quilt in a Better Homes and Gardens magazine, I couldn't wait for an excuse to make it. Then a girlfriend of mine told me that she was about to have a baby girl...

The pattern for this quilt is from Australian Better Homes and Gardens Magazine February 2008, Pages 26, 165-166. The quilt pattern is called Papillon.

The butterfly and birds are temporarily secured to the quilt with Vliesofix before they are quilted on. I did each one at a time, as I have been told that it can come off and make a mess if it's not sewn.

Some of the fabrics in this quilt are vintage Australian flora prints. Note the Sturt Desert Pea in two of the different fabrics.

Note the original border that I had for the quilt. It was a mix of cotton and poly cotton and I found that it stretched too much as I was working with it, so I removed it and added the plain homespun purple fabric instead. I think that comparing the two, in the end I made the best choice. The plain purple 'frames' the quilt nicely, whereas the purple patterned fabric is too busy.

This is actually the best photo that I have of the butterflies close up, the rest were too blurry or the light wasn't right. (Note to self, take better photos of my quilts and lots of them!)

It's hard to see, but with the butterflies I haven't just sewn them on in any of the standard applique styles. I've actually sewn all over the butterfly as if to mimic the veins of the insect.

Again this photo shows the original border that I had on the quilt.

 I had this quilt professionally quilted by the same lady who did my first quilt (and a few more later on). The quilted pattern is flowers with hearts as the leaves. On the top the quilt the thread used was variegated green, yellow, blue and red and on the bottom side of the quilt the thread was pink to blend in with the backing fabric.

The binding is pink homespun fabric which I thought would contrast with the purple borders on the front and the light pink butterfly fabric I've used as the backing.

The back of the quilt. Thought I'd be a bit quirky and add an extra butterfly so it didn't look too boring.

A Man sized French Braid Quilt

                                                         Matt's French Braid Quilt

This second French Braid quilt ended up becoming a Christmas present for my brother. He had admired the size of the 'man sized' quilt and after discussing with him fabric choices, I set out to make another quilt.

For my brother's quilt the backing was a navy homespun with a large white polka dot design. The quilted design on his quilt was the Baptist Fan and again I had it professionally quilted by the same long arm quilter. The back thread of the quilting is white to show up against the navy fabric and also to meld into the dots. The binding I made out of aqua fabric with light blue small dots on it, as I thought it would stand out from the front and the backing fabrics, while still being masculine.

I tried to select more masculine colours for his quilt, but I did also sneak in a bright red and white Hawaiian hibiscus flower print. He loves it, as it reminds him of Hawaiian shirts.

You can see scraps from other quilts that I've already made, still being useful. Note the green and white polka dot material (from my son's quilt border), a scrap of blue striped fabric (which was one of the borders in Scotty's quilt) and the black and white arc print (which also featured in my own french braid quilt).

The shoe box is part of my quilting process. I often keep cut up pieces in shoe boxes so that they stay flat and don't require ironing over and over again. (Life is too short for ironing!)

This photo is of the seven completed braids, all trimmed up neatly and placed side by side for effect.

I wish that I'd taken more pictures of this quilt during the quilting process. Oh well...I know for next time now.
Truth be told, I've actually started to make another one (only in the cutting stages so far, but still I can't stop myself from making this pattern over and over again.) Don't know who this one is for yet, but I'll put a post on here when it's finished.

My French Braid Quilt

French Braid Quilt

On the way to work one day I stopped at a newsagent to gab myself some 'lunch break reading', it was then that I stumbled across a magazine called Down Under Quilts. Being new to quilting I decided to purchase the mag and fell in love with the quilt on the front cover. Even though I was already in the middle of 'piecing' another quilt for myself I HAD to make this quilt and so the madness began...

This quilt contains 602 rectangles which are then made up into 7 'Braids'. Which means that there are approx 86 rectangles per braid.
I had a lot of fun cutting up all of the fabrics, most of which were purchased from eBay stores in the Charm Pack or Jelly Roll style. In fact I ended up buying too much fabric and had enough left over to make another quilt without having to rush out and buy more to get it started.

In fact I've ended up getting caught in a cutting out rut and ended up with far too many spare rectangles and so have made a couple of cushion covers for a friend in the same style.
While cutting up the fabrics I managed to watch a lot of DVDs once my son had gone to sleep for the night. I even got some strange looks from work mates who were keen to have a knock off drink, but were put off with the excuse that I was desperate to get home and keep on cutting up my fabrics.

I put off completing the binding as I was worried that I'd stuff up the last join of the binding. Now of course I consider myself a bit of a binding pro and feel silly for not finishing the quilt off sooner and being able to use it.

The backing fabric is a beautiful chocolate butterfly vintage style print which was a wide back. I purchased this though the lady who did the long arm quilting for me. I just looked at the website and made my selection and let her know what I wanted. Too easy.
The top of the quilting thread is a combination of brown and tan which melds into the sashing fabric colour, as well as standing out on some of the darker fabrics for a nice effect. The thread used on the back is a dark brown which blends into the backing fabric beautifully.

The quilted pattern is butterflies and leaves with swirling flowers.

For the binding I used a distinctive black and white daisy design.
The batting was also purchased from the long arm quilter as I would have found it difficult to find a batting that would match the quilt for size.

All in all, I'm pretty happy with the quilt that I've made for myself!

Scotty's Quilt or adventures in a Quilt Kit from eBay

Scotty’s Quilt or Adventures with a Quilt Kit from eBay

This quilt was a 30^th Birthday present for one of my oldest and best friends. I struggled for some time to find a quilt that would be suitable for a male. Whilst looking at fabric on eBay I happened to stumble across this quilt kit and thought that it would be appropriate for anyone.

This quilt was a lot of fun to make and came together very quickly. I highly recommend purchasing a quilt kit when you are well and truly sick of measuring and cutting! In fact I think that every quilter should make themselves try it just once and then you can make up your own minds!

 
I must admit that this is the first quilt where I attempted to sew triangles, and the very thought of that as a relatively new quilter really terrified me. But after doing a little bit of research on Google and in quilting magazines I discovered a way to stop the ends of the triangle bunching up or getting caught in the feed dogs and therefore wrecked. I start every seam now with a little snip of fabric, and since making this quilt I have made that a general practise no matter what I sew now.

I think after cutting up so many rectangles for my own French Braid quilt I really enjoyed the reprieve of not having to do any cutting. I do most of my cutting in front of the TV, but still we all know that even with a rotary cutter there is a fair amount of strain on fingers, wrists and joints...regardless of your age!

Firstly I sewed together the striped squares; there were a total of sixteen coloured squares to be sewn from four quarter triangles.  I then sewed the squares to the black fabric as per the instructions. Then I laid the large strips out on the floor to see how it would look once complete. Next I sewed the strips together to form the centre piece of the quilt. Then there was a strip of striped fabric to be sewn.

At this stage I realised that there was a mistake and that this quilt was nowhere near enough to being what I intended it to be.  (Being a grown man, and wanting all of my quilts to be used, I thought that it was best that I made the quilt a bit larger so he’d be more likely to use it on his bed).

So I took one of the last black strips of fabric from the kit and set off for the quilt shop to try and match it. I also obtained some more striped fabric to make another border, as well as another type of striped fabric to make the binding (which usually isn’t included along with the backing or the wadding in most quilt kits from what I can determine).

I washed the new fabrics separately and waited for them to dry and then cut them to the size that I needed. I then added the extra ‘round’ of the quilt and was happy that it would be a decent size (and also pretty keen to get it into the quilters so that I would have a chance to get it to my friend for his 30^th). I used the services of the same long arm quilter who used a variegated thread in a slightly different style to stippling.

When the quilt came back this time I was all prepared with the binding all made up and ready to be sewn on.

My friend loves his quilt and is in awe of my efforts and I know that it’s something that he will always use!

The first quilt I ever finished.

Time to show off a bit and show you my first completed quilt!

So I’m a bit obsessed with quilting and patchwork and at any given time have far too much fabric, as well as some half cut up bits and pieces of fabric and too many quilt tops in various stages for my own good. My guest room needs to be cleared (and this can take about an hour, just to move stuff out of there, so that guests can actually get to the bed!). We don't have visitors all that often, so really it's known as my craft room.
I wasn’t warned when I purchased fabric on an impulse to make my first quilt that this would become an all consuming addiction.  No one gave me any clue that soon, I wouldn't want to go through one day without sewing, selecting new quilts to make, sorting or buying more fabric.

But I’d like to show off some of the quilts that I have made and tell you all about them, while I try to complete another project...

So the first quilt that I completed (although it’s not the first that I started, and I’m sure that the previous comment will only be understood by someone who has also caught the quilting bug) was for my son. I started it in April 2009 and ended up finishing it in October 2009. Which I thought wasn’t all that bad going for someone who worked part time, looked after the home and all the other stuff that has to get done, decided half way through the quilt to order fabrics off of eBay (and wait and wait and wait) for them to arrive. Then as an impulse I’ve decided to make the quilt bigger so that it was more of a single bed sized quilt instead of just a baby sized ruggy. I justified this to myself as I was putting in a fair amount of time, money and effort and wanted the quilt to be something that my son got to keep on using as he grew, not something that ended up taking up more space in my already crowded linen cupboards and sat out of sight.
So the inspiration for this quilt is from a magazine, and although I did deviate from the instructions I will provide the details. Zoe Clifton. “On Four Wheels”. Patchwork & Stitching. Vol 9, No 7. Pages 20-23.

First up I had real difficulty finding boy fabrics (that I liked enough to have in the quilt) in a rural town and scoured five quilt shops within a 300km radius. Then I checked out what was available on eBay and actually ended up buying some licensed fabric that way and it worked out to be very reasonably priced.  

I managed to get Bob the Builder Fabric, The Simpsons Fabric, Thomas the Tank Engine Fabric, Cars Fabric and Buzz Light-year Fabrics all from various eBay sellers.
I then purchased the Green polka dot fabric from the new local Lindcraft store to make the borders to turn a quilt designed to be 125cm (49 inch) into a quilt that is now 119cms (46.5 inches)  across by  187cms (74 inches) long. So the quilt fits nicely on a king single bed.
The backing fabric was purchased from The Fabric Palette in Gladstone and I had to sew it side by side to fit. Knowing what I know now, I no longer use light colours as a backing fabric; but like I said it was the first quilt that I completed so I didn’t know any better.
The quilt was professionally quilted by a long arm quilter in the area in the stippling style. The thread used to quilt it is a variegated red, orange and yellow thread on top and on the back it’s a cream colour that blends in nicely to the backing.

The binding I made myself once the quilt came back from being quilted. I made the binding out of navy blue homespun fabric. The binding was sewn onto the quilt by machine and I finished it off by hand which took me two days of solid sewing in a busy household. From the top the binding appears to measure half an inch, but it was made from a 2.5inch strip, folded over and sewn onto the quilt, then folded and tacked on.

The sense of achievement that I felt making my son his first patchwork quilt made me feel so good, that I have been hooked from that moment on. I have since finished another four quilts and have another four quilt tops ready to be basted and then quilted, as well as several more beginnings of quilts. I'll keep you posted as to how they go...

Cross Stitched Handtowels or Baby Burp Cloths

Materials: Aida Cloth, DMC Thread, Cross Stitch Needle, Cotton Thread, Handtowels.

Tools: Pins, Scissors, Tape Measure, Sewing Machine, Quick Unpick.

Remember to prewash Handtowels before starting this project.

Note: I also washed the cross stitched strips by hand in Lux Soap Flakes to ensure that the thread colours wouldn’t ‘run’ later and ruin the piece.

Once constructed the piece should be washed either by hand or in a delicate bag , on a gentle cycle in the washing machine.  (This will ensure the stitching doesn’t come away and will enhance the life of the piece.)

I had cross stitched several different designs on strips some years ago with the intention of making them into decorative handtowels and have only completed the construction of the pieces in the last few days.

Originally I completed two daisy style handtowels as gifts for Mothers Day, while the rest of my handiwork has set idle in a shoebox in amongst other craft supplies.

This blog has helped me to realise how long (and needlessly) these items have remained incomplete and given me the push to finish them.

 

 

Back of Aida Cross Stitched Strip with edges ironed over ready to be sewn.

I start by folding the edges of my pre laundered Aida design, so that I may sew a hem and stop the item from fraying. I iron the edges to ensure a straight hem and to check that the fold is even and allows enough of a border around the design. (This is the great thing about ironing, if you don’t like how the edge looks, just iron it flat and start again).

Next I ensure that the cross stitched strip is in the correct position, I pin the strip and take a step back to take a good look and check that it looks straight. I also check that the measurement from the bottom of the cross stitched strip to the bottom of the handtowel are the same measurement on both sides to ensure that the strip is sitting straight.

I sew one seam on along each ironed edge to avoid fraying. Then I fold over and iron the edges on each end. Lay the strip against the handtowel to double check where the folds should be. Then sew the two end edges. Once the four seams are complete you will be left with a neat cross stitched strip.

t’s now time to place the cross stitched strip on the handtowel and decide how far from the bottom of the handtowel you would like it to be fixed. In my case, depending on the design I like to place the strip roughly between 4" - 5" or 9 - 12cms  from the bottom depending on the thickness of the cross stitched strip.

 

Now sew your strip to your handtowel, being careful to not sew over your pins. (This can result in stitches being skipped, or the sewing machines needles breaking). When the first seam is sown check that there aren’t any ‘bubbles’ in the fabric and that the pins for the second seam are in the position that you require. Then sew the second seam. Once done, take the time to check your work and ensure it is as you would like it to be.

If you’ve made mistakes, that’s ok, just get a quick unpick and undo them, re-pin and sew again.

I made the mistake of thinking that I didn’t need to pin the strips on to the handtowel. It came out looking like this...

So I thought it best to pin the rest!

If needed pin the side sections of the strip (this may not be necessary, as it’s already in place), and sew the sides down to avoid anymore movement in the strip.

After completing the two ends of the strip your towel is complete!

Feel free to make your own as gifts, or for yourself.

Completed Cross Stitched Baby Burp Towel

Note: I found the cross stitch designs and patterns for these pieces in books borrowed from the library and from cross stitch magazines.

I found some cross stitched patterns didn’t fit on prepared Aida which is made specifically for border work. This is why I have used regular Aida and cut the item down to my preferred size later on.